| GENERAL |
Frequency response: |
|
30 Hz ÷ 15 Khz. ± 0.3 dB ( By-Pass) |
| AGC Control: |
|
± 10 dB |
| Stopband Rejection: |
|
Greater than 90 dB beyond 17 KHz |
| Noise: |
|
Output noise depends by processing parameters,
AGC, Threshold, Gain and Density.Greater than 84 dB DIN Audio |
| Total Distortion @ 1 Khz: |
|
0.05 % |
| Total separation: |
|
Greater than 60 dB DIN Audio (90 dB @ 3 Khz) |
| ANALOG INPUT |
configuration: |
|
Left and Right |
| |
Impedance: |
|
10 KW electronically
balanced |
| |
input level: |
|
- 20 ÷ +10 dBm |
| |
Common Mode Rejection: |
|
Greater than 50 dB (30 Hz ÷ 15
Khz) |
| |
Connectors: |
|
XLR type-female.
Pin 1 GND, Pin 2 Inphase, Pin 3 Return |
| |
Pin 2 and 3: |
|
electronically balanced |
| ANALOG OUTPUT |
configuration: |
|
Left and Right,
Flat, pre or de-emphasized (50 ÷ 75 S.) |
| |
Impedance: |
|
10 KW electronically
balanced |
| |
output level: |
|
0 +12 dBm |
| |
Common Mode Rejection: |
|
Greater than 50 dB (30 Hz ÷ 15
Khz) |
| |
Connectors: |
|
XLR type-female
.Pin 1 GND, Pin 2 Inphase, Pin 3 Return |
| |
Pin 2 and 3: |
|
electronically balanced |
STEREO GENERATOR (mirage
MPX only) |
configuration: |
|
1 output with level control |
| Pilot frequency: |
|
19 Khz ± 0.001 % Max over temp. |
| Pilot injection: |
|
2 ÷ 12 % adjustable |
| Distortion @ 1 Khz: |
|
Less than 0.005
% |
| Signal to noise ratio: |
|
Greater than 92 dB Din audio |
| Stereo separation: |
|
Greater than 60 dB 30 Hz ÷ 15 Khz ( 70 dB
@ 1 Khz) |
| Crosstalk M/S S/M: |
|
Greater than 45 dB 30 Hz ÷ 15 Khz ( 75 dB
@ 1 Khz) |
| 38 and 76 Khz suppress: |
|
Greater than 80 dB |
| Composite output level: |
|
0 ÷ + 12 dB on 50 |
| Connector: |
|
BNC , floating over chassis |
| Max cable length: |
|
10 mt. RG 58 A/U
100 mt. with 6 MPX distributor phase advancer AEV DPA 6 |
| Pilot reference output: |
|
Vpp. square Wave on 600 |
| Connector: |
|
BNC , floating over chassis |
| SCA input: |
|
- 14 ÷ + 6 dBm for 10% modulation of main
carrier |
| Impedance: |
|
10 KW |
| Connector: |
|
BNC , floating over chassis |
| RDS input: |
|
- 24 ÷ 0 dBm for ± 2 Khz of main carrier |
| Impedance: |
|
10 KW |
| Connector: |
|
BNC , floating over chassis |
| GENERAL DATA |
Power requirement: |
|
87 ÷ 265 VAC 50 ÷ 60 Hz |
| |
Consumption: |
|
8 VA |
| |
Dimension: |
|
48.3 x 24 x 4.4 cm 1 rack unit |
| |
Weight: |
|
3.8 Kg. (8.4 Lbs) |
| |
Operating temperature: |
|
0 ÷ 50°C |
|
|
|
|